Windows N 11 Audio Troubles? Here’s How to Restore Your Mic Functionality

Found yourinternal microphone not working properly inWindows 10 ? Don’t worry, you’re not alone. This is a fairly common error, and it’s usually not very hard to resolve.

Here we’ve included three possible solutions that have proved helpful to many users. You may not need to try them all; just work your way down the list until you find the one that works for you.

Fix 1: Update your device drivers

Fix 2: Set microphone as default device

Fix 3: Re-enable microphone in Device Manager

Fix 4: Modify privacy settings

Disclaimer: This post includes affiliate links

If you click on a link and make a purchase, I may receive a commission at no extra cost to you.

Fix 1: Update your device drivers

If you got the mic-not-working issue after having Windows Updates, it’s possible that the drivers (especially the sound card driver) you’re using currently are out-dated, missing, or incompatible with your system. In case you’re not sure whether all the drivers are working fine, you should check.

You can do this in Windows Device Manager, one device at a time. But this takes a lot of time and patience, and if any of your drivers do happen to be out of date, you’ll need to manually update them, which is difficult and risky. If you don’t have the time, patience or computer skills to update your device drivers manually, you can do it automatically with Driver Easy .

Driver Easy will automatically recognize your system and find the correct drivers for it. You don’t need to know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing. Driver Easy takes care of everything.

You can update your drivers automatically with either the FREE or the Pro version of Driver Easy. But with the Pro version it takes just two clicks (and you’ll get full support and a 30-day money-back guarantee):

1. Download and install Driver Easy.

2. Run Driver Easy and click Scan Now . Driver Easy will then scan your computer and detect any problem drivers.

3. Click the Update button next to all flagged devices to automatically download the correct version of their driver, then you can manually install the driver (you can do this with the FREE version).

Or click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system (this requires the Pro version – you’ll be prompted to upgrade when you click Update All).

Note: If you have any problems usingDriver Easy Pro to update your driver, please feel free to email us at support@drivereasy.com . We are always here to help.

Fix 2: Set microphone as default device

Chances are your mic has not been set as the default device, so the sound won’t be played through it. To set your mic as default, you should perform the following procedure:

1. Click the speaker icon in the notification area of your taskbar. Then click Open Volume mixer .

2. SelectSystem Sounds .

3. Go to the Recording tab, right-click an empty area inside the devices’ display list, and then tick Show Disabled Devices to ensure that your mic device shows up.

4. Click to highlight your microphone, then clickSet Default > Default Device .

Note: Your mic device may not be listed as “Microphone” and the icon thereof may not even resemble a microphone. You should be able to recognize it yourself.

Click here

You can also right-click the mic item and check if it is disabled. If it is, select Enable to get your mic working.

5. Again, click to highlight your mic. This time, clickProperties .

6. On the Levels tab, see if your mic is muted. In case it is (as shown in the following screenshot), click on the little speaker icon to unmute your mic. On completion, click OK .

7. ClickOK to save all the changes you’ve made.

Check to see if your mic is working fine. If it isn’t, please move on to the next fix, below.

Click here

Fix 3: Re-enable microphone in Device Manager

This is a quick yet useful solution when your internal microphone ran into glitches. Just follow the steps below to disable and then re-enable the mic device from Windows Device Manager:

1. On your keyboard, press theWindows logo key andR at the same time to invoke the Run dialog box. Then, typedevmgmt.msc and clickOK .

2. In the pop-up window, double-click theAudio inputs and outputs entry and find your mic device in the drop-down list.

3. Right-click your mic and selectDisable device .

4. Wait a few seconds. Next, right-click your mic again and selectEnable device .

Now check to see your mic is back on track.

Fix 4: Modify privacy settings

There’s a possibility that your privacy settings related to the microphone has been reset after a Windows Update or other system events. If so, your mic may be forbidden to work normally. To check and modify these settings, here’s what you can do:

1. On your keyboard, press the Windows logo key and I at the same time to fire up the Settings window. Then, select Privacy .

2. On the Microphone tab, in the results pane, click Change to see if the toggle for Microphone access for this device has been set to Off. If it is, simply turn iton .

Below you’ll see another toggle for Allow apps to access your microphone . Also turn iton if it’s been set to Off.

3. Scroll down and head over to Choose which apps can access your microphone . Make sure all the apps you need can access the mic.

If this fix doesn’t work, please proceed to the next one.

Hopefully this article helped you resolve your mic issues. If you have any follow-up questions or ideas, please feel free to leave a comment below. Thanks for reading!

• Windows 10

Also read: