Managing Windows Settings Through Company Policy - Problem Resolved

Troubleshooting Persistent Loops in Windows 10 Automatic Repairs - Solved

When you met boot error with Windows 10, you hoped that automatic repair will help fix the problem. But it got you more troubles. The worse thing is that repair process seems never end. Then what to do to end the loop? Read on to find the solutions.

Since the Windows keeps restarting, it is impossible for you access Advanced Options, that you can fix the problem there. In this case, you can boot from a USB or DVD.

To use the solutions below, you’ll need to prepare a bootable USB or a DVD with an installation file on it. If you are not sure how to create a bootable USB, refer How to Burn Windows 10 ISO to USB . Note you need to do this on another computer.

First start your PC from the USB or DVD and open Command Prompt

For USB bootable way:

Plug the USB the computer that has the problem.After you power on the computer, press function key, usually F2 or F12, to enter boot menu. The key to enter boot menu depends on the computers that you are using. You can go to the PC manufacturer’s website to check for it.

For DVD bootable way:

Insert the DVD to the computer that has the problem. Wait until you see the message “Press any key to boot from CD or DVD”. Press any key to continue. If you don’t see this message, you probably have to change the boot order in the BIOS (Basic Input/Output System) .

LearnHow to Boot from a USB Drive, DVD or CD .

2. When you go to the setup screen, select the Language that you wish to use.

3. Then you will see the Windows Install screen, selectRepair your computer at the bottom left corner.

4. In Choose an option screen, selectTroubleshoot .

5. Then selectAdvanced options .

6. In Advanced Options screen, selectCommand Prompt . Then a new screen will be displayed with and open command prompt. If you are prompted to enter password, enter your Windows password.

After opening the Command Prompt window, use below solutions to fix the loop error.

Solution 1: Restore Windows Registry

Follow these steps: 1. In Command Prompt, t ype copy c:\windows\system32\config\RegBack\* c:\windows\system32\config and hitEnter .

2. If prompted to overwrite existing files, typeAll and hit Enter .

3. Type exit and hitEnter to close the Command Prompt window.

4. Restart your computer.

Solution 2: Disable Automatic Startup Repair

1. In Command Prompt, typebcdedit and hitEnter . Then you will see the result displayed. Look forresumeobject item and note the number next to it (In below case, the number is 7ce0dd34-d277-11e4-8263-68f7286346fb).

2. Type bcdedit /set GUID recoveryenabled No and hitEnter . Replace GUID with the number that you noted in last step. (For example, if the number is 7ce0dd34-d277-11e4-8263-68f7286346fb, the full command will be “bcdedit /set 7ce0dd34-d277-11e4-8263-68f7286346fb recoveryenabled No”)

3. Reboot your PC and Windows should start without no problem.

Solution 3: Remove Your RAM

The loop error can be fixed by simply removing the RAM. You can try this solution. Before removing, remember to turn off the PC.If you have more than one RAM, remove one at a time then start your PC without it. You might need to do this a few times until you test every RAM module.

After entering Windows, run a disk check to check if there is any problem with the disk, and run a system file check to check if some system files are corrupted. If neither of them work, try to restore Windows registry.

Run a disk check

Follow steps below:

1. OpenCommand Prompt as an administrator.

2. Typechkdsk /f /r and hitEnter . You need to wait a while until the process completes.